Multiple Monitors with the 5DMkII

One of the big issues with DSLRs is monitoring and the 5DMkII is especially awkward. Not only do you have to deal with HDMI, which can be a pain to split, you also have to deal with the signal dropping to 480p when you hit record. We bought the AJA HA5 thinking that we’d be able to send HD-SDI to our Panasonic HD-LCD monitors only to find that the device can’t handle 480p and, after talking to AJA at NAB, it doesn’t sound like this is an issue that can be resolved via a firmware update. That leaves the unit from BlackMagic as the only option.

Until yesterday. Ladies and gentlemen, the HDFury2:

The HDFury2 takes the HDMI ouput from the Canon 5DMkII and converts it, while keeping all the high def goodness, to a component HD signal. That can then be split out, using T-Adapters available at Radioshack, and the signal can then be sent to 2 monitors, one for the DP and one for the client/director. The HDFury2 comes with a power supply but I diodn’t have any issues at all not powering the unit — instead, it took power over the HDMI connection. That might drain your batteries, though, so make sure you have spares or a charging station.

The HDFury2 works with both the 5DMkII and the 7D so it should work with the 1DMkIV although I don’t have access to one to test that out. Another nice feature of the HDFury2 is the ability to monitor audio, either analog or digital optical — there’s a multi-port on the bottom of the unit that allows for either a 3.5mm jack to be plugged in or a Toslink cable. Finally, the unit can be switched between RGB or YUV, so you’ve got all the options you could ever want.

Is this is solution to monitoring? Probably not. One thing I learned at NAB is that there are a TON of manufacturers working on DSLR solutions to there will probably be something bigger, better and more ready for the field in the future. But for $200? I haven’t seen anything else like it.

You can buy the HDFury2 from Curt Palme. The version we bought was the GREEN kit, although we actually don’t need the 5 BNC cable that comes with it as the regular RGB cable it comes with is all we’re using. You’ll then need some T-Adapters and RCA:BNC adapters. All in, you should be dropping about $220 for the ability to monitor the video from your Canon DSLR to two professional monitors.

Chris Cardno

Production Manager